No drilling, no dowels – stable mounting on terraces, flat roofs, and balconies
Anyone looking to install a satellite or reception antenna often faces the same question: How do I securely mount the mast without damaging the roof or terrace? The answer lies in high-quality mounting bases, balcony stands, and terrace stands from the ASSAT brand – developed, patented, and introduced to the European market over 20 years ago.
Mounting base or terrace stand – what's the difference?
A mounting base is mounted directly onto a solid surface and supports the antenna mast vertically. It is particularly suitable for flat roofs or paved areas where screwing into the ground is possible.
A terrace stand works without drilling – it is stabilized by the weight of concrete slabs. Ideal for renters, heritage buildings, or anywhere where structural alterations are not permitted.
ASSAT Mounting Bases – Aluminum and Steel for every application
ASSAT offers mounting bases in two material variants:
Aluminum Mounting Bases – lightweight, corrosion-resistant, ideal for permanent outdoor installation:
- ASSAT Aluminum Mounting Base / 0.6m, Ø 50mm / Plate 19x19cm – compact for smaller antennas
- ASSAT Aluminum Mounting Base / 1.0m, Ø 50mm / Plate 19x19cm – standard height for most installations
- ASSAT Aluminum Mounting Base 1.0m – Ø 50mm – disassemblable – space-saving for transport and storage
Steel Mounting Bases – maximum stability for larger antennas and higher wind loads:
- ASSAT Steel Mounting Base / 1.0m, Tube Ø 48mm / braced – classic bracing for high stability
- ASSAT Steel Mounting Base / 1.0m, Tube Ø 48mm / disassemblable – flexible and easy to assemble
- ASSAT Steel Mounting Base / 1.0m, Tube Ø 60mm / braced – for heavier antennas
- ASSAT Steel Mounting Base / 1.0m, Tube Ø 60mm / disassemblable – stable alternative with easy assembly
- ASSAT Steel Mounting Base / 1.0m, Ø 76mm braced – for professional installations with large antennas
ASSAT Balcony Stands – compact solution for smaller antennas
For smaller satellite and reception antennas on balconies or terraces, ASSAT offers lightweight and compact balcony stands – in both aluminum and steel. The crucial advantage: a single 50x50 cm concrete slab is sufficient for stabilization – no drilling, no dowels, minimal effort.
Aluminum Balcony Stands – lightweight and corrosion-resistant:
- ASSAT Aluminum Balcony Stand / 50x50cm, Tube Ø 50mm / Var. I – classic design for standard installations
- ASSAT Aluminum Balcony Stand / 50x50cm, Tube Ø 50mm / J Var. II – J-shape for space-saving mounting on the balcony railing
Steel Balcony Stands – maximum robustness:
- ASSAT Steel Balcony Stand / Plate 50x50cm / Var. IV – stable steel construction for more demanding conditions
✅ A 50x50 cm concrete slab is sufficient for stabilization
✅ No drilling required
✅ Ideal for smaller antennas on balconies and terraces
✅ Quick assembly – only a wrench is needed to tighten the connections
ASSAT Goliath (SKU 32456) – the flagship among terrace stands
The ASSAT Goliath / Steel Stand 4x50x50cm, Ø60mm, 10° inclinable (SKU 32456) is not just another terrace stand – it is the most powerful solution of its kind on the market. No comparable product combines higher load capacity with faster assembly.
| Feature | Value |
|---|---|
| SKU | 32456 |
| Load capacity | 1,600 Nm |
| Max. antenna size | up to Ø 120 cm |
| Mast mount | Ø 60 mm |
| Concrete slabs | 4 × 50x50 cm |
| Tilt compensation | up to 10° inclined surfaces |
| Mast alignment | continuously vertically adjustable |
| Assembly time | 3–4 minutes from unpacking |
| Delivery | pre-assembled in standard carton |
| Shipping | as a normal package – no bulky goods |
Why the Goliath is unrivaled:
1,600 Nm load capacity – this means that even large satellite dishes up to Ø 120 cm can be mounted safely and permanently. No other comparable product on the market can withstand higher forces and be assembled as quickly.
Inclined surface? No problem. Thanks to its sophisticated design, the Goliath can be set up on surfaces inclined by up to 10° – the mast can then be continuously aligned vertically. What looks complex in the product photo is effortlessly simple in practice.
3–4 minutes assembly time – the Goliath is delivered pre-assembled. Open the carton, set it up, place four 50x50 cm concrete slabs, mount the antenna – done. No drilling, no specialist knowledge required – only a wrench is needed for tightening.
Standard package shipping – despite its power, the Goliath is delivered in a normal carton. No bulky goods surcharges, no freight forwarding – fast and inexpensive delivery directly to the customer or construction site.
Ideal for B2B customers and installers:
For specialist companies that install antenna systems daily, the Goliath is a real time-saver. 3–4 minutes assembly time per system – for multiple installations per day, this adds up to significant cost savings. Combined with the highest load capacity in its class, the Goliath is the first choice for professional installers.
The right stand for every situation
| Situation | Recommendation |
|---|---|
| Flat roof, screwing possible | Aluminum or steel mounting base 1.0m |
| Balcony, smaller antenna, 1 concrete slab | ASSAT Aluminum or Steel Balcony Stand |
| Terrace, no drilling, large antenna | ASSAT Goliath SKU 32456 |
| Large/heavy antenna up to Ø 120cm | ASSAT Goliath SKU 32456 |
| Professional installation, time saving | ASSAT Goliath SKU 32456 |
| Space-saving transport / storage | Disassemblable mounting base |
Quality made in Europe – Brand A.S.SAT®
All ASSAT mounting bases, balcony stands, and terrace stands are distributed under the registered brand A.S.SAT® – on the European market for over 20 years. The products were personally developed, patented, and designed for both professional and private use by the brand owner.
👉 You can find all mounting bases and terrace stands directly in the shop at assattes.com
Do you have questions about assembly or product selection? Write to us – we will help you find the right solution for your installation.